Selling Price -
Selling Price -
2024 New Holland Construction Compact Wheel Loaders W50C TC
High Productivity Built On ExperienceNew Holland’s C Series range of compact wheel loaders offer a fresh alternative to the traditional farm, landscape, municipal projects and material handling solutions. In addition to being an asset in other areas in the light construction industry, New Holland's W50C ZB, W50C TC and W80C HS models aid in loading diet-feeders and high-sided trailers.
Features may include:- Engine
The entire compact wheel loader range boasts 3.4 liter Common Rail F5H engines developed by FPT Industrial that comply with stringent Stage V emissions regulations. Advanced Common Rail technology delivers precise fueling for optimal response and also has significantly reduced fuel consumption compared to previous models. This super-quiet engine provides up to 75 hp and up to 314 Nm of torque for guaranteed productivity and operator comfort. The entire range uses Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) technology for Stage V compliance, which is maintenance-free and further enhances efficiency to reduce total cost of ownership.
- Transmission, Axles & Hydraulics
All models are equipped with hydrostatic transmissions. Press the accelerator and go, smoothly and without fuss.
- Cab And Comfort
An almost unobstructed 360-degree vision is offered by the newly designed cab. The elevated driving position and an abundance of curved glass within four narrow pillars ensure the best view of any materials handler on the market. Access via the wide-opening glass door is easy and straightforward. Operators will appreciate the bright airy space and fully opening side window and low noise levels of 71dB(A). Further comforts include 10 air vents, air conditioning, air suspended seat, tilting and telescopic steering column and many useful storage compartments.
- Design
New Holland compact wheel loaders are designed to maximize productivity and minimize the time needed for servicing and attachment changeover. The line-up delivers consistently high levels of performance in every task. Operators enjoy the superior comfort of the cab, maximizing their productivity with minimum fatigue.
- Linkage And Versatility
New Holland compact wheel loaders are designed to maximize productivity and minimize the time needed for servicing and attachment changeover. The line-up delivers consistently high levels of performance in every task. Operators enjoy the superior comfort of the cab, maximizing their productivity with minimum fatigue.
- 2024
- New Holland Construction
- Compact Wheel Loaders
- W50C TC
- Compact
- Model: F5HFL463B F001
- Dry type element w/ warning restriction indicator
- 4 cylinders
- full load (rpm): 2500 | Low idle (rpm): 950 | High idle, no load (rpm): 2500
- @ 2500 rpm (Gross hp (kW)): 58 (43) | @ 2500 rpm (Net hp (kW)): 55 (41) |
- @ 1400 rpm (Gross lb. ft. (Nm)): 181 (245) | @ 1400 rpm (Net lb. ft. (Nm)): 185 (251)
- 4-stroke
- Integral
- Integral
- 3.898 in
- 4.33 in
- 0.9 gal
- High pressure common rail injection
- Diesel
- Planetaries: Outboard
- Hydrostatic
- 1.85
- Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
- 120 amps
- Voltage: 12 V | Batteries: 95 AHR, 900 CCA
- Turtle - Forward/Reverse (mph (kph)): 3 (5) / 3 (5) | Rabbit - Forward/Reverse (mph (kph)): 12 (20) / 12 (20)
- Breakout force with tilt cylinder: 9048 lbf
- at 2500 rpm: 18 gpm
- Main relief: 3335 psi
- Bucket reach - fully raised, 45° dump: 26” | Bucket reach - 7 ft 0 (2.13m), 45° dump: 37” | Fork load center: 20 in | Loader clearance circle: 331 in
- Cab: 97” | Operating - fully raised with spillguard: 154” | pin height - fully raised: 121” | Dump: - fully raised, 45°: 93” | Max height below forks: 116 in
- Tread: 55” | Bucket: 74 in
- 82”
- Under shaft: 17” | Under axles: 13” | Fork: 53 in
- bucket level on ground: 204””
- Without bucket: 69”
- Outside: 146”
- Dig: 5”
- Forks: 47 in
- 23 gal
- 15 gal | Reservoir: 11 gal
- 3 gal
- Bucket: 0.7 yd³
- Buckett: 1.0 yd³
- Full height (lbs): 5542 | Maximum reach (lbs): 6140 | Ground (lbs): 6614
- 10,913 lbs
- Fork: 745 lbs | Bucket: 844 lbs
- Angle of departure: 28° | Turning angle From center: 40 degrees, Total angle: 80 degrees, Rear axle oscillation, total: 18 degrees | Fuel Filter: Replaceable, full flow | Radiator Core type: Staggered | Fan: Direct drive | Differential: Open or LSD
- Alpena, Michigan
- New
- 45466
- 2024
- New Holland Construction
- Compact Wheel Loaders W50C TC
- Model: F5HFL463B F001
- Hydrostatic
- Diesel
- Available
- Tread: 55” | Bucket: 74 in
- Cab: 97” | Operating - fully raised with spillguard: 154” | pin height - fully raised: 121” | Dump: - fully raised, 45°: 93” | Max height below forks: 116 in